Skip to content
Home › Grade 7 Math › Grade 7 Quizzes › Scale Drawings Quiz – Grade 7 (10 Questions)

Scale Drawings Quiz – Grade 7 (10 Questions)

Last updated: October 22, 2026 · Written by the Math Made Easy math teachers

Grade 7 Math Quizzes – Mathbot, the Math Made Easy robot coach, with free printable quizzes for Grade 7
Looking for a scale drawings quiz? Then this Grade 7 quiz on Scale Drawings: Lengths, Areas and Scale Factors asks 10 multiple-choice questions with instant feedback. Ten multiple-choice questions check using scales, scale factors and area changes. Each wrong choice comes from a common slip such as dividing instead of multiplying or forgetting to square the scale, so ask whether your answer should be larger or smaller than the starting length.

Standards: 7.G.A.1 · Level: Grade 7

Mathbot, the Math Made Easy robot coach

What this Scale Drawings: Lengths, Areas and Scale Factors quiz checks

  • A scale such as 1 in = 4 ft means every inch on the drawing stands for 4 feet in real life.
  • The scale factor equals drawing length divided by actual length in the same unit.
  • Lengths change by the scale factor, but areas change by the square of the scale factor.
  • Redrawing at a new scale multiplies each drawing length by old scale ÷ new scale.

The 10 questions of the quiz

  1. A scale is 1 in = 8 ft. A drawing length is 4.5 in. What is the actual length?
  2. The scale is 1 in = 18 mi. A real distance is 54 mi. How long is it on the map?
  3. Use the map to find the actual distance from Lark to Moss.
  4. A scale factor is 124. An actual length is 9 ft. What is the drawing length?
  5. Every length on a drawing is multiplied by 4. By what number is the area multiplied?
  6. The small rectangle is enlarged by scale factor 3. What is the area of the larger rectangle?
  7. A blueprint uses 14 in = 1 ft. A wall is 5.5 in long on the blueprint. What is the actual length?
  8. The scale is 1 in = 5 ft. An actual area is 150 sq ft. What is the area on the drawing?
  9. Drawing A uses 1 in = 10 ft and Drawing B uses 1 in = 5 ft. How do lengths on B compare with A?
  10. Which scale factor makes a reduction?

After the quiz

Missed a question? Reread the Scale Drawings: Lengths, Areas and Scale Factors lesson, then take the quiz again. Next, solve the Grade 7 worksheet on Scale Drawings: Lengths, Areas and Scale Factors, one star first, then two and three stars. Finally, take the chapter test under real conditions, without notes and with a timer.

Scale Drawings lessonScale Drawings worksheetScale Drawings test

Mis à jour le